PRIMESOL

Colour             :           Amber, clear

Oduor              :           Characteristic solvent odour

Flash point      :           Around 50 degree c

Sp. Gr              :           0.905.

USE

PRIMESOL is a versatile solvent degreaser available in both emulsifying and non emulsifying types. PRMESOL is ideal for:

1. All surfaces and interfaces of grease, grime and accumulated dust with low carboneous contamination.
2. All machinery parts including engine blocks, motor generator housing, bearings, gears etc.
3. All workshops floors where there is grease and organic spillage like rubber tyre marks caused by heavy vehicles, bonding agents etc.

APPLICATION

• PRIMESOL can be ideally sprayed on small and manageable surfaces. Alternatively it can be poured and spread over larger surfaces.
• Allow a contact reaction time of 5 – 10 minutes and wipe off small surfaces with cotton rags or water wash if preferred. For floors water wash is advisable most – PRIMESOL
• Ageing and stubborn problems can be addressed by repeated treatment with PRIMESOL in a more localized manner.
• For workshop use like vehicle yards, wire brushing floors after reaction time is advised if grime is more than half an inch thick. Continue cleaning after loosened up grime with PRIMESOL and flush with pressurized water.
• Mechanical cleaning alternated with PRIMESOL can economize the chemical usage.