RUST REMOVER is a concentrated aqueous liquid solution consisting of a blend of synergetic antioxidants and passivators. It is used to remove rust from any steel surface area and rust stains from brass, copper, stainless steel, wood, ceramic and aluminum surfaces, painted or not. Additionally, it contributes to the rust proofing of metals before any painting or coating application.
CHARACTERISTICS, ADVANTAGES & APPLICATIONS
- Readily removes rust and rust stains from metal and non-metal surfaces.
- Protects and keeps surfaces free from corrosion.
- Removes and prevents flash and light rust due to passivation.
- Acts as a rust proofing agent before the application of paints or coatings.
- Non-flammable, does not affect rubber or plastic compounds.
- May be used with a specific range of other cleaning products.
- Cost effective, easy to apply and use.
PHYSICAL PROPERTIES
RUST REMOVER is a non-flammable mixture of special acids, passivators and emulsifiers. Appearance / Color : Clear, colorless liquid Specific gravity : 1.23-1.25/15°C pH : 1 Solubility in water : Complete Odor : Odorless
APPLICATION AND USE
A) DOSING PROCEDURE
RUST REMOVER must be used diluted with fresh water with a percentage concentration ranging between 10-50% depending on the desired strength of the solution. Note that a 10% solution is sufficiently strong can be used for most general/everyday situations involving rust. The 50% solution is recommended when we have very difficult cases, involving areas that are very heavily
B) Cleaning Procedure: Before application, when the affected area has been determined, ensure the absence of oil, grease, dirt or other foreign matter. Then shake the RUST REMOVER well and prepare the desired concentration solution. The solution may now be applied either by brushing and/or injection. Smaller parts may be immersed directly into the prepared solution. In all of the above situations, you must allow RUST REMOVER to act for 20-40 minutes and then rinse thoroughly with high or regular pressure fresh water. Note that in cases for where RUST REMOVER has been specifically used to rust proof an area, before it is to be painted or coated, there is no need to rinse
| Skin Contact | Avoid Skin contact. Otherwise, wash contaminated area thoroughly with water. Seek medical attention. |
| Inhalation | Avoid inhalation of vapors. Otherwise, seek fresh air source at once. Seek medical attention. |
| If Swallowed | Avoid ingestion. Otherwise, consume a considerable quantity of water. Do not induce vomiting. Seek medical attention. |
| GENERAL INSTRUCTIONS | Avoid spillage, splashing and mishandling. Precautionary measures for body protection are strongly recommended before use. |
